FRDK reinforced sleeve for directional drilling FRDK manufacturer from China CYG Changtong New Material Co,,Ltd.

FRDK reinforced sleeve for directional drilling

Price:	20.0~50.0 USD
Payment Terms:	T/T,L/C
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: FRDK

Production Capacity: 2000 Set/Sets / Day

Delivery Date: 10-30 days

Dielectric Strength: ≥25 MV/m

Elongation at Break: ≥400%

Means of Transport: Ocean,Air

Packing: according to customer requi...

Burst Strength: ≥2000N

Tensile Strength: ≥17 MPa

FRDK is specifically designed for girth weld corrosion protection on pipes used in directional drilling applications

FRDK is a high performance fiberglass reinforced sleeve specifically designed for girth weld corrosion protection on pipes used in directional drilling applications.

Construction: three-layer system

First layer: liquid epoxy, solvent-free, two-component

Second layer: high shear strength hot-melt adhesive

Third layer: radiation cross-linked, high density polyethylene, fiber reinforced composite structure.

Additional component: Wear Cone as extra protection against pull-through forces, of the same construction as the main sleeve.

The FRDK system provides effective protection against abrasion and wear forces that occur during the pull-through operation. The system is fully compatible with cathodic protection systems, resists cathodic disbondment and is designed for a wide range of operating temperatures.

Features:

Superior cathodic disbondment and hot water immersion resistance.

Highly resistance to shear and peel forces induced by soil and thermal movement.

Easy to apply with minimal training

Superior abrasion resistance

Excellent adhesion performance

Preheat requirement for product installation

Application

---Oil & gas pipelines for directional drilling

---Water pipelines for directional drilling

---Compatible line coating: PE, FBE, Coal Tar

Properties		Requirements		Test Method
Backing
Burst Strength (N) (Fibre re-inforced sleeve)		≥2000		EN 12068
Heat Aging (150oC,168h) (Fibre re-inforced sleeve)		≥1700		EN 12068
Dielectric Strength (MV/m)		≥25		ASTM D 149
Environmental Stress Cracking (F50) (h) (10%Co630, 50±2oC)		≥1000		ASTM D 1693
Tensile Strength (MPa)		≥17		ASTM D 638
Elongation at Break (%)		≥400		ASTM D 638
Chemical Resistance (168h) (N)	10%HCl	≥85		ASTM D 638
	10%NaCl	≥85		ASTM D 638
	10%NaOH	≥85		ASTM D 638
Volume Resistivity (Ω·m)		≥1×1013		ASTM D 257
Adhesive
Ring & Ball Softening Point (oC)		≥90		ASTM E 28
Lap Shear (MPa) (23±3oC)		≥1.0		EN 12068
Sleeve
Holiday Test (kV)		15		EN 12068
Peel Strength (23±2oC) (N/cm)		PE/PE PE/Primer Steel PE/FBE	≥70 ≥70 ≥70	ASTM D 1000
Peel Strength (50±2oC) (N/cm)		PE/PE PE/Primer Steel PE/FBE	≥15 ≥15 ≥15	ASTM D 1000
Indentation Resistance (mm)		≥0.6		EN 12068
Impact Strength (23±3) (J)		≥15		EN 12068
Cathodic Disbonding Resistance (mm) (23±3oC)		≤20		EN 12068
Hot Water Immersion (120d, 65oC)		No delaminating, no blisters or water ingress		ASTM D 870

Product Specifications

specification	Circumferential length of sleeve	Closure patch width	Wear cone width
FRDK159*500-1.5/1.0	680	100	≥150
FRDK219*500-1.5/10	900	120	≥150
FRDK273*500-1.5/10	1070	120	≥150
FRDK325*500-1.5/10	1260	120	≥150
FRDK355*500-1.5/10	1360	120	≥150
FRDK426*500-1.5/10	1600	150	≥200
FRDK508*500-1.5/10	1900	150	≥200
FRDK529*500-1.5/10	1940	150	≥200
FRDK610*500-1.5/10	2220	200	≥200
FRDK711*500-1.5/10	2560	200	≥200
FRDK813*500-1.5/10	2880	200	≥250
FRDK1219*500-1.5/10	4180	200	≥250